BM-11
$499.99
Temporarily out of stock. ETA is late April 2026.
Out of stock
Description
Our highly praised shallow subwoofer is back! Our BM-11 puts a refreshing spin on the high-performance shallow subwoofer. We tooled up a new basket, a new Carbon Fiber flat diaphragm, and an all-new low profile S-surround to maximize ease of installation. The result is an 11″ subwoofer with only a 3.0″ mounting depth while still having 13 mm one-way Xmax. Getting proper bass out of a shallow subwoofer is challenging but we have the right recipe with our dual-gap 10 piece neo column shallow subwoofer. The multi-piece neo column motor drives a 3″ copper voice coil through two magnetic gaps with a shorting ring directly in the middle to lower and linearize inductance for super quick bass response. Linear piston movement of 13 mm one-way makes sure your bass is distortion-free during the most demanding program material. We optimized the custom tooled S surround to have the highest surface area possible while still allowing enough mechanical travel past the linear limits of the motor. Up front and personal is the beautiful glossy Carbon Fiber flat piston. A careful balance of motor strength and moving mass allows our BM-11 subwoofer to play a broader bandwidth than any other shallow subwoofer on the market. Mounting depth is only 3.0″ and physical weight is light at only 16 lbs.
Key Features:
- Flat Carbon Fiber sandwich diaphragm
- Custom tooled cast aluminum frame
- Custom engineered S surround w/integrated gasket
- 3″ diameter solid copper voice coil
- Ten-piece neo column motor structure
- XBL^2 topology for reduced inductance and high Xmax
- 13 mm one-way linear excursion
- 500 watts RMS power handling
- Dual 2 Ohm voice coil configuration
- Small sealed enclosure size of 0.30 to 0.75 ft^3
- Approved for Infinite Baffle use
- Shallow mounting depth of 3.0″
10.0″ Cutout
11.14″ OD
3.09″ Mounting depth
Displacement: 0.03 ft^3
T/S SPECIFICATIONS:
Re: 3.1 ohms (voice coils in series)
Fs: 22.6 Hz
Qes: 0.74
Qms: 5.45
Qts: 0.65
Le: 1.6 mH
Sd: 68.95 in^2
Vas: 49.7 L
Bl: 13.0
Mms: 297 g
Sensitivity: 84.9 dB (2.83V/1m)
Xmax: 13.0 mm (one-way linear)
RMS power: 500 watts RMS
Subwoofers Specifications
Quick Info
| Weight | 16 lbs |
| Dimensions (OD) | 11.14 inches |
| Dimensions (Cutout) | 10 inches |
| Mounting Depth | 3.09 inches |
| Displacement | 0.03 cubic feet |
| RMS | 500 watts |
Thiele-Small Parameters
| Re | 3.5 Ohms |
| Fs | 34.1 Hz |
| Qes | 0.95 - |
| Qms | 6.69 - |
| Qts | 0.83 - |
| Le | 1.6 mH |
| Sd | 68.95 square inches |
| Vas | 22.4 Liters |
| BL | 14.6 Tesla Meters |
| Mms | 270.9 grams |
| Cms | 80 µM/N |
| Xmax | 14 mm one-way 70% BL |
| SPL | 85.33 dB |
Materials
| Surround Material | Rubber - |
| Cone Material | Carbon Fiber - |
| Voice Coil Material | Copper - |
| Magnet Material | Neodynium - |
Enclosure Recommendations
| Sealed Enclosure Volume | 0.40 cubic feet |
| Minimum Sealed Enclosure Volume | 0.35 cubic feet |
| Maximum Sealed Enclosure Volume | 0.70 cubic feet |
Performance & Compliance
| Frequency Response Minimum | 8 Hz |
| Frequency Response Maximum | 2000 Hz |
| Sensitivity | 85.33 dB |
Additional Specifications
| Voice Coil Diameter | 3 inches |
| Terminal Type | Spring - |













Caleb Reynolds –
Not sure why there is only 1 review cause these are awesome! Very clean and loud af for a shallow sub.
I’ve got mine on @ 500watts but half that is all you need. For more testimonials, check Reddit and diyma!
J. Trinidad (verified owner) –
Purchased this for a front sub in my GX470.
Plays 90hz down to 45hz for midbass. Great kick drum reproduction.