Out of Stock!

TM65 mkII Woofer


Out of Stock. No ETA available yet.

SKU: TM65mkII Category:

Out of stock

Product Description

Introducing the all new fully custom tooled TM65 mkII. The TM65 mkII features a custom tooled cast aluminum basket with a built-in rain shield to protect the moving components while also allowing free flowing sound from the back side of the cone with the baskets open slats.

Next is the custom engineered and custom tooled “S” surround.

The cone is a slightly concave unit composed of air-injected polypropylene for a seamless radiating area that will withstand the test of time.

At the rear of the TM65 mkII is the XBL^2 neo slug motor capable of driving the moving assembly to 9 mm of one-way linear excursion and 23 mm of total peak stroke. Dual aluminum shorting rings inside the motor aid in lowering and linearizing inductance for improved transient performance.

  • Normal 6.5″ fitment (not oversized)
  • 2.4″ mounting depth
  • 4 Ohm voice coil
  • XBL^2 motor topology
  • Low inductance
  • Dual aluminum shorting rings
  • Custom tooled cast aluminum basket
  • Uniform concave air-injected polypropylene cone
  • Custom tooled “S” shaped weather resistant surround
  • 120 watts RMS Power Handling
  • Ideal for “IB” car door installations
  • 143 mm cutout
  • 167 mm basket OD
  • Exact fit hex head mounting screws included
TM65 6.5″ Woofer
Re 3.2 ohms
Fs 69 Hz
Qes 0.90
Qms 3.0
Qts 0.69
Le 0.03 mH
Sd 136.9 cm^2
Vas 5.5 L
Mms 25 g
BL 6.2
Sensitivity (2.83v/1m) 88 db
Xmax 9 mm
Xmech 13 mm