Cutout diameter of V3 (I think??)

Zxcvtypo · 03-28-2010, 05:33 PM

Hey guys, having a box built for the sub I just bought (haven't received it yet) and I'm wondering what the cutout diameters will need to be to flush mount it..any way I can get this without measuring myself? It's a V3 with the claw basket as you can see in the pics..

***Electrodynamic*** · 03-29-2010, 11:13 AM

The cutout diameter is the same as all 12 spoke baskets (even though it's not a 12 spoke) at 11.125". However, we used that basket a long time ago and no longer have the total OD of the basket with the gasket on. You'll have to take some measurements yourself to flush mount it.

PS: That's actually a v1 basket on a v3 motor with v3 soft parts.

03-28-2010, 05:33 PM	#1 (permalink)
Zxcvtypo Junior Member Join Date: May 2008 Posts: 2	Cutout diameter of V3 (I think??) Hey guys, having a box built for the sub I just bought (haven't received it yet) and I'm wondering what the cutout diameters will need to be to flush mount it..any way I can get this without measuring myself? It's a V3 with the claw basket as you can see in the pics..

03-29-2010, 11:13 AM	#2 (permalink)
*Electrodynamic* Stereo Integrity Owner Join Date: Mar 2008 Location: Charlotte, NC Posts: 1,052	The cutout diameter is the same as all 12 spoke baskets (even though it's not a 12 spoke) at 11.125". However, we used that basket a long time ago and no longer have the total OD of the basket with the gasket on. You'll have to take some measurements yourself to flush mount it. PS: That's actually a v1 basket on a v3 motor with v3 soft parts. __________________ Electrodynamic Don't install suckage! Power handling is not a power requirement. Last edited by Electrodynamic; 03-29-2010 at 11:30 AM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)