Which version Mag do I have?

Motoracer243 · 08-22-2008, 10:53 PM

I just bought this 15" prototype Mag, these aren't my pics but its the same sub.
I need to know some specs on this thing...

What version is it? how old?
Would it work well in a 3.5 cu ft. enclosure tuned to 32hz w/50-60 sq in of port area?
What is the displacement?
How much power? I want to run an AQ1200d...

Thanks alot..

cjj2d · 08-24-2008, 12:50 AM

where did you purchase this from???

I am not positive, but if it is a mag, I would say it looks like a v3.

Motoracer243 · 08-24-2008, 05:23 PM

its a mag. I bought it off of someone on caraudio.com and they bought it off of nick.

sundownz · 08-25-2008, 09:52 AM

It is not a production Mag at all - it is not like any Mag ever made, just a one-of-a-kind prototype.

Motoracer243 · 08-26-2008, 12:08 AM

ahh ok. Thankyou for clearing that up. I sure hope the box I plan on building will work out good...

sturchionix · 09-04-2008, 08:29 PM

i thought nick burns all of his protos. i can't image hed let one go to someone not close enough to him that would want to sell it. could it be one surfacing from the break in?
(sorry to bring up the horrible past)

*Tirefryr* · 09-04-2008, 10:02 PM

Nick and Jake have a lot of "Frankensteins." Don't be surprised if they get loose in the general public. If they come across something they don't want copied, you can rest assured, you won't see any photos or any other mention of it.

sundownz · 09-05-2008, 09:29 AM

Quote:

Originally Posted by sturchionix

i thought nick burns all of his protos. i can't image hed let one go to someone not close enough to him that would want to sell it. could it be one surfacing from the break in?
(sorry to bring up the horrible past)

No, this one is a legit prototype. Since it was not at all the direction he decided on going with the Mag he doesn't mind it floating around

08-22-2008, 10:53 PM	#1 (permalink)
Motoracer243 Junior Member Join Date: Aug 2008 Posts: 3	Which version Mag do I have? I just bought this 15" prototype Mag, these aren't my pics but its the same sub. I need to know some specs on this thing... What version is it? how old? Would it work well in a 3.5 cu ft. enclosure tuned to 32hz w/50-60 sq in of port area? What is the displacement? How much power? I want to run an AQ1200d... Thanks alot..

08-24-2008, 12:50 AM	#2 (permalink)
cjj2d Junior Member Join Date: Mar 2008 Location: Murfreesboro TN Posts: 27	where did you purchase this from??? I am not positive, but if it is a mag, I would say it looks like a v3. __________________ 2002 Nissan Altima 210 amp Iraggi Alt 1/0 Big 3 Phoenix Gold 10 Farad PowerGrid HU: Alpine 9855 Fronts: MB Quart Q series Front amp: PPI PC2150 Sub: 15" SI Mag D2 Sub Amp: PPI PC2350 Front Stage Active to be installed: mids: Seas w16nx's mid amp: PPI PC2150 tweeters: TO BE DETERMINED tweeter amp: PPI PC2100

08-25-2008, 09:52 AM	#4 (permalink)
sundownz Member Join Date: Mar 2008 Posts: 143	It is not a production Mag at all - it is not like any Mag ever made, just a one-of-a-kind prototype. __________________ - Jacob Fuller - Owner, Sundown Audio - Associate, Stereo Integrity

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

08-24-2008, 05:23 PM	#3 (permalink)
Motoracer243 Junior Member Join Date: Aug 2008 Posts: 3	its a mag. I bought it off of someone on caraudio.com and they bought it off of nick.

08-26-2008, 12:08 AM	#5 (permalink)
Motoracer243 Junior Member Join Date: Aug 2008 Posts: 3	ahh ok. Thankyou for clearing that up. I sure hope the box I plan on building will work out good...

09-04-2008, 08:29 PM	#6 (permalink)
sturchionix Junior Member Join Date: Jun 2008 Posts: 3	i thought nick burns all of his protos. i can't image hed let one go to someone not close enough to him that would want to sell it. could it be one surfacing from the break in? (sorry to bring up the horrible past)

09-04-2008, 10:02 PM	#7 (permalink)
Tirefryr Super Moderator Join Date: Mar 2008 Location: IN Posts: 337	Nick and Jake have a lot of "Frankensteins." Don't be surprised if they get loose in the general public. If they come across something they don't want copied, you can rest assured, you won't see any photos or any other mention of it.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)