New Mag and BM pictures

***Electrodynamic*** · 03-30-2008, 03:07 AM

I took some pictures of what the new Mag and BM drivers are going to look like while I was in Ningbo this week. So without further wait, here they are

The Mag and BM are going to be equipped with a custom, flush, gasket with "Stereo Integrity" raised on the top. The gasket tooling was finished this past Thursday so I will post a picture of the sample as soon as I get it. For now, the pictures that I took do NOT have the gasket pictured.

I'll post up more information about both the Mag and the BM such as exactly what each of the models are going to be equipped with for production.

PS: Our logo and "Mag D2" are etched into the back of the basket. No screen printing there!

*hoss* · 03-30-2008, 09:42 AM

i want more BM pics!!!

*Tirefryr* · 03-30-2008, 11:11 AM

Both look great! I hope they both perform as well as they look! I don't see why they won't.

*Tirefryr* · 03-30-2008, 11:26 AM

You might wanna throw these up on SSA just to tease people too. Just give them these photos and say, "that is all." Ala Incriminator Audio. "Here's some photos and no other information."

hobie1dog · 03-30-2008, 12:03 PM

Might be hope for us yet.

***Electrodynamic*** · 03-30-2008, 12:05 PM

Yeah true. Before long I'm going to have Aaron install the re-direct to our forum when you click on "Stereo Integrity" on the SSA board. I want people to visit our forum though.

*Tirefryr* · 03-30-2008, 12:06 PM

Quote:

Originally Posted by Electrodynamic

Yeah true. Before long I'm going to have Aaron install the re-direct to our forum when you click on "Stereo Integrity" on the SSA board. I want people to visit our forum though.

Is there away to transfer all the information on there now over here?

hobie1dog · 03-30-2008, 12:15 PM

I think the planets would have to be in alignment first before that can happen...but I don't know much about these puters

soydeedo · 03-30-2008, 12:40 PM

Pretty sure he's already stated that denim is gonna help him out with that.

Nice pics, btw. The Mag came out looking a lot better than I had envisioned from the line drawings you had previously posted.

EDIT: You should probably make the front page forum link to this forum rather than SSA, though. =P

1sashenka · 03-30-2008, 03:28 PM

Looking good!!!

03-30-2008, 03:07 AM	#1 (permalink)
*Electrodynamic* Stereo Integrity Owner Join Date: Mar 2008 Location: Charlotte, NC Posts: 1,148	New Mag and BM pictures I took some pictures of what the new Mag and BM drivers are going to look like while I was in Ningbo this week. So without further wait, here they are The Mag and BM are going to be equipped with a custom, flush, gasket with "Stereo Integrity" raised on the top. The gasket tooling was finished this past Thursday so I will post a picture of the sample as soon as I get it. For now, the pictures that I took do NOT have the gasket pictured. I'll post up more information about both the Mag and the BM such as exactly what each of the models are going to be equipped with for production. PS: Our logo and "Mag D2" are etched into the back of the basket. No screen printing there! __________________ Electrodynamic Don't install suckage! Power handling is not a power requirement! Simon Eichenberger is the man.

03-30-2008, 12:03 PM	#5 (permalink)
hobie1dog Senior Member Join Date: Mar 2008 Location: Cornelius, NC Posts: 524	Might be hope for us yet. __________________ The bitterness of poor quality remains long after the sweetness of low price has faded. Marry the right person: This one decision will determine 90% of your happiness. Still looking for the speaker that will bruise my chest from Billy Cobham's kick drum.

03-30-2008, 12:05 PM	#6 (permalink)
*Electrodynamic* Stereo Integrity Owner Join Date: Mar 2008 Location: Charlotte, NC Posts: 1,148	Yeah true. Before long I'm going to have Aaron install the re-direct to our forum when you click on "Stereo Integrity" on the SSA board. I want people to visit our forum though. __________________ Electrodynamic Don't install suckage! Power handling is not a power requirement! Simon Eichenberger is the man.

03-30-2008, 12:15 PM	#8 (permalink)
hobie1dog Senior Member Join Date: Mar 2008 Location: Cornelius, NC Posts: 524	I think the planets would have to be in alignment first before that can happen...but I don't know much about these puters __________________ The bitterness of poor quality remains long after the sweetness of low price has faded. Marry the right person: This one decision will determine 90% of your happiness. Still looking for the speaker that will bruise my chest from Billy Cobham's kick drum.

03-30-2008, 12:40 PM	#9 (permalink)
soydeedo Junior Member Join Date: Mar 2008 Posts: 45	Pretty sure he's already stated that denim is gonna help him out with that. Nice pics, btw. The Mag came out looking a lot better than I had envisioned from the line drawings you had previously posted. EDIT: You should probably make the front page forum link to this forum rather than SSA, though. =P Last edited by soydeedo; 03-30-2008 at 12:43 PM.

03-30-2008, 09:42 AM	#2 (permalink)
hoss Super Moderator Join Date: Mar 2008 Posts: 371	i want more BM pics!!!

03-30-2008, 11:11 AM	#3 (permalink)
Tirefryr Super Moderator Join Date: Mar 2008 Location: IN Posts: 362	Both look great! I hope they both perform as well as they look! I don't see why they won't.

03-30-2008, 11:26 AM	#4 (permalink)
Tirefryr Super Moderator Join Date: Mar 2008 Location: IN Posts: 362	You might wanna throw these up on SSA just to tease people too. Just give them these photos and say, "that is all." Ala Incriminator Audio. "Here's some photos and no other information."

03-30-2008, 03:28 PM	#10 (permalink)
1sashenka Junior Member Join Date: Mar 2008 Posts: 35	Looking good!!! __________________ Alpine 9887 Arc Audio 2300SE > CDT ES-010, CDT ES-07, CDT 560i Arc Audio 2300SE > 2 x 12" Stereo Integrity Mags(v4) Rockford Fosgate Riot Cables Monster Cable 300 Series Speaker Wire Focal Plain-Chants Dynamat Monster Cable 2-Farad Cap Optima Yellow Top 180 amp Iraggi Amputator alt Rockford Fosgate 0AWG "Big 3"

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode