BM's for HT

10-17-2008, 02:25 PM

hey guys. first post over on SI.com.

nice to see a few faces on here that i know from CA. anyhoo. i'm getting 2 BM's from jacob, the ones that he ended up reconing, for use in my HT most likly. here is the idea. to try to make something like this....

but tuning somewere closer to 27hz with about 2.75 total cubes. would this be a good box for HT, or should i just try a standard ported box. thanks.

***Electrodynamic*** · 10-17-2008, 04:50 PM

Holy crap, that's a nice box!

I don't know how well Jacob's re-coned BM's are going to work out in a vented enclosure - the Q is pretty high. They are cool looking little guys though.

10-18-2008, 08:48 AM

thumpper on ssa made that. If it doest work well I'll put them in the car, shag up another oem and use them. I don't quite have enough power on tap for that though.

***Electrodynamic*** · 10-18-2008, 09:42 PM

I should have added if you're doing just HT, they should rock in that enclosure. For music, not so much, but for HT use they'll probably do really well.

10-25-2008, 03:33 PM

finished building it yesterday. got a little chance to play a little music with it. didn't sound to bad. it was to early to crank it up yet. i'll have to post a few pics of it later.

gmf1 · 01-28-2009, 01:03 AM

Pics!

hobie1dog · 02-20-2009, 08:31 AM

This is one that was built in a dormer spot on the side of a HT room

10-17-2008, 02:25 PM	#1 (permalink)
rollerdj Guest Posts: n/a	BM's for HT hey guys. first post over on SI.com. nice to see a few faces on here that i know from CA. anyhoo. i'm getting 2 BM's from jacob, the ones that he ended up reconing, for use in my HT most likly. here is the idea. to try to make something like this.... but tuning somewere closer to 27hz with about 2.75 total cubes. would this be a good box for HT, or should i just try a standard ported box. thanks.

10-17-2008, 04:50 PM	#2 (permalink)
*Electrodynamic* Stereo Integrity Owner Join Date: Mar 2008 Location: Charlotte, NC Posts: 1,148	Holy crap, that's a nice box! I don't know how well Jacob's re-coned BM's are going to work out in a vented enclosure - the Q is pretty high. They are cool looking little guys though. __________________ Electrodynamic Don't install suckage! Power handling is not a power requirement! Simon Eichenberger is the man.

10-18-2008, 09:42 PM	#4 (permalink)
*Electrodynamic* Stereo Integrity Owner Join Date: Mar 2008 Location: Charlotte, NC Posts: 1,148	I should have added if you're doing just HT, they should rock in that enclosure. For music, not so much, but for HT use they'll probably do really well. __________________ Electrodynamic Don't install suckage! Power handling is not a power requirement! Simon Eichenberger is the man.

02-20-2009, 08:31 AM	#7 (permalink)
hobie1dog Senior Member Join Date: Mar 2008 Location: Cornelius, NC Posts: 524	This is one that was built in a dormer spot on the side of a HT room __________________ The bitterness of poor quality remains long after the sweetness of low price has faded. Marry the right person: This one decision will determine 90% of your happiness. Still looking for the speaker that will bruise my chest from Billy Cobham's kick drum.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

10-18-2008, 08:48 AM	#3 (permalink)
rollerdj Guest Posts: n/a	thumpper on ssa made that. If it doest work well I'll put them in the car, shag up another oem and use them. I don't quite have enough power on tap for that though.

10-25-2008, 03:33 PM	#5 (permalink)
rollerdj Guest Posts: n/a	finished building it yesterday. got a little chance to play a little music with it. didn't sound to bad. it was to early to crank it up yet. i'll have to post a few pics of it later.

01-28-2009, 01:03 AM	#6 (permalink)
gmf1 Junior Member Join Date: Jun 2008 Posts: 13	Pics!

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)