Aww it's so cute

JonMR2turbo · 07-08-2008, 02:26 PM

I wonder what it's going to be when it grows up?

Just picked it up today. This will replace the ancient Cadence Q2000 powering my components.

*Tirefryr* · 07-08-2008, 04:27 PM

Sweet! A mini!

Love the countertop as well.

JonMR2turbo · 07-08-2008, 04:45 PM

Thanks but that's actually my new desk.

*Tirefryr* · 07-08-2008, 04:56 PM

Either way.

CrazyKenKid · 07-08-2008, 06:48 PM

that thing is awesome!! how much did you pay for it and where did you get it?

Power @ 4 ohms 2 X 70 watts
Power @ 2 ohms 2 x 125 watts
Power @ 4 ohms (Bridged) 1 x 250 watts
Signal to Noise 92dB
THD .05
Frequency Range 20k – 20KHz
Crossover Butterworth (5Hz – 550Hz)
Bass Boost 15dB 45Hz
Fuse 1 X 30

Size 8.25(L) x 4.8” (W) x 1.7”(H)

Fully adjustable high pass and low pass crossovers
Crossover range 55Hz-550Hz
18dB bass boost @45Hz
Low radiated noise for clean AM/FM reception
Stable to two ohms stereo
Very high damping factor
Optically isolated mosfet power supply
Can drive highly reactive loads
Protection against: reverse voltage, over voltage, speaker short, and thermal overload

it is called the ks 125.2 mini! lmoa it is awesome!

JonMR2turbo · 07-08-2008, 06:58 PM

I got it from a local shop for $320 after taxes. It's really neat, it's almost comical how small it is.

CrazyKenKid · 07-08-2008, 08:58 PM

lol that is little expensive to pay for a over sized mouse! lmoa! jk! how does it sound with your component set though? does it do the job the way a bigger amp would? i wonder what they left out to make it so small and compact, i jsut makes me wonder how good it really is or is it jsut for show... lol!!

***Electrodynamic*** · 07-08-2008, 09:11 PM

Sweetness! Those amps are super tiny! Thanks for posting the pic of your mouse on top of the amp - it really shows the scale of how small the amp is.

JonMR2turbo · 07-08-2008, 10:34 PM

I haven't had it hooked up yet because my head unit is in the shop getting fixed. I did mount it though, with my crossovers. Now I'm just waiting on speaker cable in the mail before I can put it in the car.

This kind of explains how they were able to make it so small but it's all mostly over my head http://www.arcaudio.com/productpics/...nirev125v4.PDF

JonMR2turbo · 07-09-2008, 10:17 AM

I popped it in the car this morning but it's not hooked up to the crossovers yet, which is ok since I don't have a head unit anyway

.

Then I will be getting a BM and putting it on top of that storage box. Everything should just barely fit.

07-08-2008, 02:26 PM	#1 (permalink)
JonMR2turbo Junior Member Join Date: Jun 2008 Location: Deerfield Beach Posts: 45	Aww it's so cute I wonder what it's going to be when it grows up? Just picked it up today. This will replace the ancient Cadence Q2000 powering my components.

07-08-2008, 09:11 PM	#8 (permalink)
*Electrodynamic* Stereo Integrity Owner Join Date: Mar 2008 Location: Charlotte, NC Posts: 1,148	Sweetness! Those amps are super tiny! Thanks for posting the pic of your mouse on top of the amp - it really shows the scale of how small the amp is. __________________ Electrodynamic Don't install suckage! Power handling is not a power requirement! Simon Eichenberger is the man.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

07-08-2008, 04:27 PM	#2 (permalink)
Tirefryr Super Moderator Join Date: Mar 2008 Location: IN Posts: 362	Sweet! A mini! Love the countertop as well.

07-08-2008, 04:45 PM	#3 (permalink)
JonMR2turbo Junior Member Join Date: Jun 2008 Location: Deerfield Beach Posts: 45	Thanks but that's actually my new desk.

07-08-2008, 04:56 PM	#4 (permalink)
Tirefryr Super Moderator Join Date: Mar 2008 Location: IN Posts: 362	Either way.

07-08-2008, 06:48 PM	#5 (permalink)
CrazyKenKid Member Join Date: Jun 2008 Location: Windsor, ON, Canada Posts: 311	that thing is awesome!! how much did you pay for it and where did you get it? Power @ 4 ohms 2 X 70 watts Power @ 2 ohms 2 x 125 watts Power @ 4 ohms (Bridged) 1 x 250 watts Signal to Noise 92dB THD .05 Frequency Range 20k – 20KHz Crossover Butterworth (5Hz – 550Hz) Bass Boost 15dB 45Hz Fuse 1 X 30 Size 8.25(L) x 4.8” (W) x 1.7”(H) Fully adjustable high pass and low pass crossovers Crossover range 55Hz-550Hz 18dB bass boost @45Hz Low radiated noise for clean AM/FM reception Stable to two ohms stereo Very high damping factor Optically isolated mosfet power supply Can drive highly reactive loads Protection against: reverse voltage, over voltage, speaker short, and thermal overload it is called the ks 125.2 mini! lmoa it is awesome!

07-08-2008, 06:58 PM	#6 (permalink)
JonMR2turbo Junior Member Join Date: Jun 2008 Location: Deerfield Beach Posts: 45	I got it from a local shop for $320 after taxes. It's really neat, it's almost comical how small it is.

07-08-2008, 08:58 PM	#7 (permalink)
CrazyKenKid Member Join Date: Jun 2008 Location: Windsor, ON, Canada Posts: 311	lol that is little expensive to pay for a over sized mouse! lmoa! jk! how does it sound with your component set though? does it do the job the way a bigger amp would? i wonder what they left out to make it so small and compact, i jsut makes me wonder how good it really is or is it jsut for show... lol!!

07-08-2008, 10:34 PM	#9 (permalink)
JonMR2turbo Junior Member Join Date: Jun 2008 Location: Deerfield Beach Posts: 45	I haven't had it hooked up yet because my head unit is in the shop getting fixed. I did mount it though, with my crossovers. Now I'm just waiting on speaker cable in the mail before I can put it in the car. This kind of explains how they were able to make it so small but it's all mostly over my head http://www.arcaudio.com/productpics/...nirev125v4.PDF

07-09-2008, 10:17 AM	#10 (permalink)
JonMR2turbo Junior Member Join Date: Jun 2008 Location: Deerfield Beach Posts: 45	I popped it in the car this morning but it's not hooked up to the crossovers yet, which is ok since I don't have a head unit anyway . Then I will be getting a BM and putting it on top of that storage box. Everything should just barely fit.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)