I'm Horny Again!

Megalomaniac · 06-23-2008, 02:59 PM

Its here!

Megalomaniac · 06-23-2008, 08:32 PM

i did this for testing purposes today

http://www.youtube.com/watch?v=-ggPTmd74Fo

http://www.youtube.com/watch?v=d8lImiYdr4o

Megalomaniac · 06-24-2008, 02:55 PM

Passenger side is mounted, was a piece of cake on that side. Currently I am trying to mount driver side, but its not as easy, there is nothing to mount to, so it will have to float a bit

and HD only had the plastic plumbers strap so its too flexible.

here are pics of passenger and a small demo video.

YouTube - Image Dynamics CD1 Pro Installing Part : Testing sturdiness

***Electrodynamic*** · 06-24-2008, 08:42 PM

Holy horns batman!! Cool deal! Let us know how they sound when you get them hooked up!

hobie1dog · 06-24-2008, 11:10 PM

You are going to run tube amps on those horns....right? That's the rules...LOL

Megalomaniac · 06-24-2008, 11:34 PM

so i took another video earlier. i point out where it sounds like its coming from. it seem my driver side is having some issues, its not as loud, i think its the speaker wires or my rcas came loose slightly when i took the dash apart

http://www.youtube.com/watch?v=mLYT-MnKC7g

my deck does not have a fader or balance in 3way mode

tomorrow I run new RCA cables(that i made) and then spend the day tuning!

Megalomaniac · 06-25-2008, 12:34 PM

Finished the RCAs today. 13'. Its funny how a whole 100' of spool almost is disappeared now. I used 78' of wire out of my spool.Used a lot of terminals too...half of those are gone now, i made some cables for some other guy too. I ran out of black heatshrink so i had to cut into my red stash

I'm hoping my whine is gone now.

Megalomaniac · 06-25-2008, 04:02 PM

ok i had the rcas installed for 5 min, i tested in car, 2 channels kept shorting dead, i fixed them now so i am goin to re run it in a min. for the short time in i heard no whine...!

***Electrodynamic*** · 06-25-2008, 04:21 PM

Quote:

Originally Posted by Megalomaniac

ok i had the rcas installed for 5 min, i tested in car, 2 channels kept shorting dead, i fixed them now so i am goin to re run it in a min. for the short time in i heard no whine...!

Well at least there's no more whine.

Megalomaniac · 06-25-2008, 06:51 PM

OK i lied it seems, the whine is still there baah! It has to be my ground, its far from the greatest ground. poo

anywho just some random pics now

06-23-2008, 02:59 PM	#1 (permalink)
Megalomaniac Member Join Date: Mar 2008 Posts: 231	I'm Horny Again! Its here!

06-24-2008, 08:42 PM	#4 (permalink)
*Electrodynamic* Stereo Integrity Owner Join Date: Mar 2008 Location: Charlotte, NC Posts: 707	Holy horns batman!! Cool deal! Let us know how they sound when you get them hooked up! __________________ Electrodynamic Don't install suckage!

06-24-2008, 11:10 PM	#5 (permalink)
hobie1dog Member Join Date: Mar 2008 Location: Cornelius, NC Posts: 453	You are going to run tube amps on those horns....right? That's the rules...LOL __________________ The bitterness of poor quality remains long after the sweetness of low price has faded. Marry the right person: This one decision will determine 90% of your happiness.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

06-23-2008, 08:32 PM	#2 (permalink)
Megalomaniac Member Join Date: Mar 2008 Posts: 231	i did this for testing purposes today http://www.youtube.com/watch?v=-ggPTmd74Fo http://www.youtube.com/watch?v=d8lImiYdr4o

06-24-2008, 02:55 PM	#3 (permalink)
Megalomaniac Member Join Date: Mar 2008 Posts: 231	Passenger side is mounted, was a piece of cake on that side. Currently I am trying to mount driver side, but its not as easy, there is nothing to mount to, so it will have to float a bit and HD only had the plastic plumbers strap so its too flexible. here are pics of passenger and a small demo video. YouTube - Image Dynamics CD1 Pro Installing Part : Testing sturdiness

06-24-2008, 11:34 PM	#6 (permalink)
Megalomaniac Member Join Date: Mar 2008 Posts: 231	so i took another video earlier. i point out where it sounds like its coming from. it seem my driver side is having some issues, its not as loud, i think its the speaker wires or my rcas came loose slightly when i took the dash apart http://www.youtube.com/watch?v=mLYT-MnKC7g my deck does not have a fader or balance in 3way mode tomorrow I run new RCA cables(that i made) and then spend the day tuning!

06-25-2008, 12:34 PM	#7 (permalink)
Megalomaniac Member Join Date: Mar 2008 Posts: 231	Finished the RCAs today. 13'. Its funny how a whole 100' of spool almost is disappeared now. I used 78' of wire out of my spool.Used a lot of terminals too...half of those are gone now, i made some cables for some other guy too. I ran out of black heatshrink so i had to cut into my red stash I'm hoping my whine is gone now.

06-25-2008, 04:02 PM	#8 (permalink)
Megalomaniac Member Join Date: Mar 2008 Posts: 231	ok i had the rcas installed for 5 min, i tested in car, 2 channels kept shorting dead, i fixed them now so i am goin to re run it in a min. for the short time in i heard no whine...!

06-25-2008, 06:51 PM	#10 (permalink)
Megalomaniac Member Join Date: Mar 2008 Posts: 231	OK i lied it seems, the whine is still there baah! It has to be my ground, its far from the greatest ground. poo anywho just some random pics now

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)