Spec on A Mag D2 V3

jrouter76 · 06-05-2011, 12:44 AM

what is the sub displacement on the Mag V3? and also how well will 2 12"s play in a common enclosure of 4.07 cu.ft. AFTER port and sub displacement tuned to 32 hz?...do I need to tune higher to get them to play loud off a Kx 2500.1 amp?

***Electrodynamic*** · 06-06-2011, 09:35 AM

Displacement is roughly 0.17 ft^3 per driver. 2 ft^3 ported will work well and no you do not have to tune them higher to get them to play loud.

jrouter76 · 06-06-2011, 10:03 PM

Quote:

Originally Posted by Electrodynamic

Displacement is roughly 0.17 ft^3 per driver. 2 ft^3 ported will work well and no you do not have to tune them higher to get them to play loud.

Thanks Nick just the answer I needed.

06-05-2011, 12:44 AM	#1 (permalink)
jrouter76 Junior Member Join Date: May 2008 Posts: 2	Spec on A Mag D2 V3 what is the sub displacement on the Mag V3? and also how well will 2 12"s play in a common enclosure of 4.07 cu.ft. AFTER port and sub displacement tuned to 32 hz?...do I need to tune higher to get them to play loud off a Kx 2500.1 amp?

06-06-2011, 09:35 AM	#2 (permalink)
*Electrodynamic* Stereo Integrity Owner Join Date: Mar 2008 Location: Charlotte, NC Posts: 1,148	Displacement is roughly 0.17 ft^3 per driver. 2 ft^3 ported will work well and no you do not have to tune them higher to get them to play loud. __________________ Electrodynamic Don't install suckage! Power handling is not a power requirement! Simon Eichenberger is the man.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)