Post your ride!

jdc753 · 08-01-2008, 02:12 PM

Dang sweet truck ya got there Impact. What is that setup about a 6" with 35's?? I would have to do an oil change or have to open the hood with that brush guard though lol. How easy is it to open up so you can pop the hood? Hoping its on hinges or something so you can get in there. Must be a blast once the pavement ends.

Impact9 · 08-01-2008, 02:13 PM

I'm using KNU wiring all the way around. I'm actually considering going to a removable vented box since everyone says the O-BM12's rock vented. I think a guy at work is going to buy my BM10 sub with box so I'm $200 closer to the pair of mags. I still got plenty of old equipment to sell off to get me there, just got to find some buyers.

Lift is 8" total, still got plans for a body lift to make it 11" in the future. Hood guard is hinged at the top. Oh yea sitting on 37" BFG's

jdc753 · 08-01-2008, 02:26 PM

Thats pretty sweet for sure, definitely think ya got the lighting covered lol, maybe some along the sides of the roof rack. That thing must go pretty good out on the trails and in the mud, your probably over the standard 9ft height limit for drive throughs though lol. 37's some big meats too, truck certainly clears them well though.

jdc753 · 08-15-2008, 11:00 AM

Did a few things to my truck

Before: Few weeks ago after it had a bath

After:

Sitting little bit higher, got a 4" RCD lift on it with 325/75R18 Nitto Terra Grappler tires wrapped around Pro Comp 18x9 6005 rims. Also removed the side steps to clean it up a bit. Its taller and looks a helluva lot better IMO but at the same time still fully usable. I can still reach over the bed sides to put stuff in and take stuff out, and climbing in/out of the bed is pretty much unchanged. Getting in and out of the cab takes a bit of a big step and small hop but nothing too cumbersome.

Impact9 · 08-15-2008, 01:16 PM

Gotta love a lifted 250! You should do a little pull contest there between your trucks. The 250 might not win but it would be damn cool to see.

08-01-2008, 02:12 PM	#51 (permalink)
jdc753 Member Join Date: Apr 2008 Location: Mass Posts: 77	Dang sweet truck ya got there Impact. What is that setup about a 6" with 35's?? I would have to do an oil change or have to open the hood with that brush guard though lol. How easy is it to open up so you can pop the hood? Hoping its on hinges or something so you can get in there. Must be a blast once the pavement ends. __________________ 2005 Ford F350 crew cab long bed, 6.0L diesel, 4x4 HU: 10.4" touch screen computer linked to Alpine 9887 Front Stage: Polk Audio SR6500 Active Front Amp: Sundown 100x4 Substage: 2x New Mag 12's Substage Amp: Sundown 1500d

08-01-2008, 02:13 PM	#52 (permalink)
Impact9 Junior Member Join Date: Jul 2008 Location: Wichita KS Posts: 20	I'm using KNU wiring all the way around. I'm actually considering going to a removable vented box since everyone says the O-BM12's rock vented. I think a guy at work is going to buy my BM10 sub with box so I'm $200 closer to the pair of mags. I still got plenty of old equipment to sell off to get me there, just got to find some buyers. Lift is 8" total, still got plans for a body lift to make it 11" in the future. Hood guard is hinged at the top. Oh yea sitting on 37" BFG's __________________ 2-Old School BM12's for sale Last edited by Impact9; 08-01-2008 at 02:15 PM.

08-01-2008, 02:26 PM	#53 (permalink)
jdc753 Member Join Date: Apr 2008 Location: Mass Posts: 77	Thats pretty sweet for sure, definitely think ya got the lighting covered lol, maybe some along the sides of the roof rack. That thing must go pretty good out on the trails and in the mud, your probably over the standard 9ft height limit for drive throughs though lol. 37's some big meats too, truck certainly clears them well though. __________________ 2005 Ford F350 crew cab long bed, 6.0L diesel, 4x4 HU: 10.4" touch screen computer linked to Alpine 9887 Front Stage: Polk Audio SR6500 Active Front Amp: Sundown 100x4 Substage: 2x New Mag 12's Substage Amp: Sundown 1500d

08-15-2008, 11:00 AM	#54 (permalink)
jdc753 Member Join Date: Apr 2008 Location: Mass Posts: 77	Did a few things to my truck Before: Few weeks ago after it had a bath After: Sitting little bit higher, got a 4" RCD lift on it with 325/75R18 Nitto Terra Grappler tires wrapped around Pro Comp 18x9 6005 rims. Also removed the side steps to clean it up a bit. Its taller and looks a helluva lot better IMO but at the same time still fully usable. I can still reach over the bed sides to put stuff in and take stuff out, and climbing in/out of the bed is pretty much unchanged. Getting in and out of the cab takes a bit of a big step and small hop but nothing too cumbersome. __________________ 2005 Ford F350 crew cab long bed, 6.0L diesel, 4x4 HU: 10.4" touch screen computer linked to Alpine 9887 Front Stage: Polk Audio SR6500 Active Front Amp: Sundown 100x4 Substage: 2x New Mag 12's Substage Amp: Sundown 1500d

08-15-2008, 01:16 PM	#55 (permalink)
Impact9 Junior Member Join Date: Jul 2008 Location: Wichita KS Posts: 20	Gotta love a lifted 250! You should do a little pull contest there between your trucks. The 250 might not win but it would be damn cool to see. __________________ 2-Old School BM12's for sale

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode