BM mkIII progress report

***Electrodynamic*** · 11-14-2009, 12:29 PM

In case some of you aren't signed up for our newsletter, here is what we just sent out earlier this week:

It's progress report time!

The BM mkIII drivers are getting ever closer to being finished. We pushed production back a few weeks so that we could send every assembled neo motor off to an independent magnet company to use their magnetizer to guarantee full saturation.

Here are a few pictures of production. This first picture shows a finished driver without the gasket:

and the second picture shows the neo motor being assembled:

Expect another newsletter early to mid next week with another progress report on the production and/or ETA.

11-14-2009, 12:29 PM	#1 (permalink)
*Electrodynamic* Stereo Integrity Owner Join Date: Mar 2008 Location: Charlotte, NC Posts: 1,148	BM mkIII progress report In case some of you aren't signed up for our newsletter, here is what we just sent out earlier this week: It's progress report time! The BM mkIII drivers are getting ever closer to being finished. We pushed production back a few weeks so that we could send every assembled neo motor off to an independent magnet company to use their magnetizer to guarantee full saturation. Here are a few pictures of production. This first picture shows a finished driver without the gasket: and the second picture shows the neo motor being assembled: Expect another newsletter early to mid next week with another progress report on the production and/or ETA. __________________ Electrodynamic Don't install suckage! Power handling is not a power requirement! Simon Eichenberger is the man. Last edited by Electrodynamic; 09-20-2010 at 02:19 PM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)