Minimum Sealed for MAG v3?

dftnz7 · 10-06-2008, 11:59 PM

I ran the Mag v3 specs in winisd and got like .81 cubes sealed for butterworth...The recommended is 1-1.3....so can I get a reasonable response in something like .85 net?

***Electrodynamic*** · 10-15-2008, 04:19 PM

The absolute minimum for a v3 12" is 1 ft^3. Perferably 1.3 to 1.5 ft^3 though. The #'s may work out another way, but they start losing low end and distortion creeps up with anything less than 1 ft^3. Not to mention the extra power needed to get anything out of it.

10-06-2008, 11:59 PM	#1 (permalink)
dftnz7 Junior Member Join Date: Aug 2008 Location: South of Chicago Posts: 6	Minimum Sealed for MAG v3? I ran the Mag v3 specs in winisd and got like .81 cubes sealed for butterworth...The recommended is 1-1.3....so can I get a reasonable response in something like .85 net? __________________ *06 Audi A4 Quattro* *04 Dodge Ram Quad Cab 4x4 Cummins* My stage is low but my hopes are high!

10-15-2008, 04:19 PM	#2 (permalink)
*Electrodynamic* Stereo Integrity Owner Join Date: Mar 2008 Location: Charlotte, NC Posts: 1,143	The absolute minimum for a v3 12" is 1 ft^3. Perferably 1.3 to 1.5 ft^3 though. The #'s may work out another way, but they start losing low end and distortion creeps up with anything less than 1 ft^3. Not to mention the extra power needed to get anything out of it. __________________ Electrodynamic Don't install suckage! Power handling is not a power requirement! Simon Eichenberger is the man.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)