Stereo Integrity Forums - View Single Post - Mag v4 vs RL-10

***Electrodynamic*** · 05-15-2009, 11:25 AM

I just posted this over on ca.com:

The rl-i is only rated for around 500 watts RMS, so putting 600-1000 on it might cause some issues with its 2" coil. If you have right at 1000 watts, you can't (shouldn't) send that to the rl-i but you can send it to the Mag. Being able to send a driver double the power compared to another is a 3 dB gain.

The inductance on the rl-i is 5 times higher than the Mag and its rated Xmax is about the same as a Mag, although it's not as linear as an XBL^2 driver. Mounting depth is the same on the SS 10" as the Mag 12" though.

05-15-2009, 11:25 AM	#6 (permalink)
*Electrodynamic* Stereo Integrity Owner Join Date: Mar 2008 Location: Charlotte, NC Posts: 1,143	I just posted this over on ca.com: The rl-i is only rated for around 500 watts RMS, so putting 600-1000 on it might cause some issues with its 2" coil. If you have right at 1000 watts, you can't (shouldn't) send that to the rl-i but you can send it to the Mag. Being able to send a driver double the power compared to another is a 3 dB gain. The inductance on the rl-i is 5 times higher than the Mag and its rated Xmax is about the same as a Mag, although it's not as linear as an XBL^2 driver. Mounting depth is the same on the SS 10" as the Mag 12" though. __________________ Electrodynamic Don't install suckage! Power handling is not a power requirement! Simon Eichenberger is the man.