[Electrodynamic]

Nope, the first picture is parallel, which would be a 1 Ohm load for the Mag. The second picture is series wiring on a single driver, which would be a 4 Ohm load for the Mag. The fourth picture (page 3) is series parallel for two drivers, which would give you the 2 Ohm load you're looking for out of a pair of Mag's and two strapped 1000D's. However, if you're running a single Mag off a single 1000D (either with a single 1000D and a single Mag, or twin un-strapped 1000D's with their own Mag), you will want to parallel (picture 1) each Mag and pair it up with your single 1000D.